Haili Machinery briefly talks about the function of the plate centrifuge

Haili Machinery: The function of the plate centrifuge

It is very important for everyone to pay attention to the application of the plate centrifuge, because this product is needed in all walks of life, so everyone who is engaged in this work should learn more and pay more attention. This problem will have a greater impact. From now on, friends in need , if you will, we'll learn more from here, and the more you know, the more options you can make.

In the whole process, the application of the flat plate centrifuge is very important to everyone, the substantive advantages of such products will be very high, now, if you want to put more attention and substantive understanding of this job, you Will love the job more and learn more from it.

Haili Machinery: How to maintain the centrifuge?

Many companies who have used flat centrifuges know that the service life of this product is shorter than that of other mechanical equipment. Generally speaking, it may take a little time to protect and maintain. If the machine is not maintained in place, the problem is very simple, not good, Broken! Because our centrifuge is exposed to corrosive substances such as sulfuric acid and hydrochloric acid for a long time, our centrifuge needs constant protection and maintenance to make the equipment we buy more durable and safer! Let me talk about general precautions , is the need for fixed-point inspection.

1. It is often necessary to check all the local threaded joints of the machine. Many places that we can see and some places that we cannot see should be checked regularly. What we see is only a simple inspection, mainly some invisible parts need to be checked. , For example, after using our flat centrifuge for a period of time, we found that there is a feeling, there may be abnormal noise, we need to check it, and more importantly, see if the screws at the connection between the bearing seat and the chassis are loose, many times the screws of the bearing seat are the feeling After a long time, it becomes loose and needs to be tightened! Also, check whether the screw connection of the anti-vibration feet is in good condition, which is something that is simply ignored during inspection.

2. Regarding the maintenance of the transmission part of the centrifuge, it is mainly to check the use of the bearing. If the machine has obvious vibration and abnormal noise during use, we may hear the abnormal noise of the bearing seat, and the bearing needs to be checked! Thank you for the question post-processing method.

As far as the plate centrifuge is concerned, we usually need to maintain the bearings, change the oil and add some lubricating oil every 3 to 6 months. If the machine is not used for a long time, it will generally not exceed 6 months. Before use, the drum needs to be rolled manually. , and see if it can roll. If it rolls easily, there is no problem with the transmission part. It can work at low speed for about 30 minutes, so that the bearings are fully lubricated before use. If rolling is laborious, you may not be able to move. It is recommended to change the lubricating oil. .

3. Regularly check the circuit and wires to see if there is any broken skin and whether there is electricity! Check the direction of the fan and vent of the inverter, the working condition of the resistance brake, and whether the motor and belt need to be replaced.

Haili Machinery thanks everyone for watching, let's see you next time.